Beowulf Performance Suite (BPS)
December 23, 2002
Copyright 2002 (c) Paralogic, Inc.


Quick Start:
------------

1) Install the rpm - "rpm -ivh <rpmfile>"
   If the rpm fails dependencies, use the source rpm.
2) If you are not using Paralogic Modules, make sure your MPI 
   paths are set correctly You will need MPICH_HOME set to your 
   MPICH path and LAM_HOME set to your LAM-MPI path. Also, if you 
   wish to use LAM-MPI, you will need the LAM's bin path in your PATH
   so that LAM can start on the nodes.
3) Run xbps  -  xbps &


